Specification sheet Wheel Loader Ref michigan-55c-i-wheel-loader

Michigan 55C-I

The Michigan 55C-I is a wheel loader with an operating weight of 24,868.15 lb (11,280 kg), a 120 hp engine, and a 2.01 yd³ (1.53 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
24,868.15lb
11,280kg
Engine power
120hp
89.5kW
Net Power
Bucket capacity
2.01yd³
1.53m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Michigan 55C-I sits below the median for its class:

  • Operating weight 24,870 lb lighter than 84% (n=439)
  • Engine power 120 hp less powerful than 90% (n=408)
  • Bucket capacity 2 yd³ smaller-bucket than 95% (n=387)

Scale drawingdrawn to scale · mm

3090B380C6610A
Side elevation
3090B2320D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2345
Engine Model OM 366
Net Power 120hp 89.5kw
Power Measured @ 2500rpm
Max Torque 274.4lb ft 372Nm
Displacement 234.4cu in 3.9L
Torque Measured @ 1600rpm
Aspiration natural

02 Operational Specification

Operating Weight 24868.2lb 11280kg
Fuel Capacity 41gal 155L
Hydraulic System Fluid Capacity 41gal 155L
Engine Oil Fluid Capacity 3.7gal 14L
Cooling System Fluid Capacity 6.7gal 25L
Transmission Fluid Capacity 6.9gal 26L
Front Axle/Diff Fluid Capacity 3gal 11L
Rear Axle/Diff Fluid Capacity 3gal 11L
Static Tipping Weight 16955.8lb 7691kg
Turning Radius 19.7ft in 5975mm
Operating Voltage 24V
Tire Size 17.5-25

03 Transmission Specification

Transmission Type clark
Max Speed - Forward 18.7mph 30km/h
Max Speed - Reverse 18.7mph 30km/h

04 Bucket Dimensions

Dump Clearance At Max Raise 9.4ft in 2865mm
Bucket Capacity - Heaped 2.01yd3 1.53m3
Bucket Capacity - Struck 1.71yd3 1.3m3
Bucket Width 8.09ft in 2464mm
Breakout Force 20050.71lb 89.19kN

05 Dimensions Dimensions

Ground Clearance 1.25ft in 380mm
Length With Bucket On Ground 21.69ft in 6610mm
Width Over Tires 7.62ft in 2320mm
Height To Top Of Cab 10.14ft in 3090mm
Wheelbase 8.67ft in 2640mm
Hinge Pin - Max Height 12.01ft in 3660mm
Reach At Max Lift And Dump 2.91ft in 884mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.