Specification sheet Wheel Loader Ref mecalac-ax-1000-wheel-loader
Mecalac AX 1000
The Mecalac AX 1000 is a wheel loader with an operating weight of 11,927.01 lb (5,410 kg), a 75 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,927.01lb
5,410kg
Engine power
75hp
56kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mecalac AX 1000 sits in the middle of its class:
- Operating weight 11,930 lb lighter than 55% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | Deutz TD 2.9 L4 | |
|---|---|---|
| Net Power | 75hp | 56kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 260 Nm | |
| Battery | 100 Ah | |
| Torque Measured @ | 1800rpm | |
| Aspiration | Low-noise, water-cooled, turbo diesel engine |
02 Operational Specification
| Operating Weight | 11927.1lb | 5410kg |
|---|---|---|
| Fuel Capacity | 23gal | 87L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Front Axle/Diff Fluid Capacity | 1.6gal | 5.9L |
| Rear Axle/Diff Fluid Capacity | 1.8gal | 6.8L |
| Steering Angle | 40degrees | |
| Turning Radius | 12.2ft in | 3700mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 11degrees | |
| Tire Size | 365/70 R 18 |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 16.4gal/min | 62L/min |
|---|---|---|
| Pump Type | Single circuit hydraulics with central gear pump |
05 Bucket Dimensions
| Breakout Force | 4000 daN | |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Dumping Angle, Top | 45degrees | |
| Lifting Force | 4300 daN | |
| Payload On Forks, Max. Turned, Frontal | 5754.07lb | 2610kg |
| Thrust Force | 4100 daN | |
| Tipping Load Standard Bucket | 9038.96lb | 4100kg |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 415mm |
|---|---|---|
| Length With Bucket On Ground | 17.56ft in | 5350mm |
| Width Over Tires | 5.75ft in | 1750mm |
| Height To Top Of Cab | 8.01ft in | 2440mm |
| Wheelbase | 6.67ft in | 2030mm |
| Hinge Pin - Max Height | 10.73ft in | 3270mm |
| Reach At Max Lift And Dump | 2.79ft in | 850mm |
?Questions & answersfrom this machine's data
- How much does a Mecalac AX 1000 wheel loader weigh?
- A Mecalac AX 1000 wheel loader has an operating weight of 11,927 lb (5,410 kg).
- What engine does a Mecalac AX 1000 wheel loader have?
- A Mecalac AX 1000 wheel loader is powered by a Deutz TD 2.9 L4 engine producing 75 hp (56 kW).
- What size bucket does a Mecalac AX 1000 wheel loader have?
- A Mecalac AX 1000 wheel loader has a bucket capacity of 2.1 yd³ (1.6 m³).
- How much fuel does a Mecalac AX 1000 wheel loader hold?
- A Mecalac AX 1000 wheel loader has a fuel capacity of 23 gal (87 L).
- What is the ground clearance of a Mecalac AX 1000 wheel loader?
- A Mecalac AX 1000 wheel loader has a ground clearance of 1.4 ft (415 mm).
- How long is a Mecalac AX 1000 wheel loader?
- A Mecalac AX 1000 wheel loader has an overall length of 17.6 ft (5,350 mm) with the bucket on the ground.
- How fast does a Mecalac AX 1000 wheel loader travel?
- A Mecalac AX 1000 wheel loader has a maximum forward travel speed of 12.5 mph (20 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.