Specification sheet Wheel Loader Ref mecalac-as-700-wheel-loader
Mecalac AS 700
The Mecalac AS 700 is a wheel loader with an operating weight of 13,183.65 lb (5,980 kg), and a 75 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,183.65lb
5,980kg
Engine power
75hp
56kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mecalac AS 700 sits in the middle of its class:
- Operating weight 13,180 lb heavier than 56% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | TCD 2,9 L4 | |
|---|---|---|
| Net Power | 75hp | 56kw |
| Power Measured @ | 2600rpm | |
| Battery | 95 Ah | |
| Torque Measured @ | 1600rpm | |
| Alternator | 120amps |
02 Operational Specification
| Operating Weight | 13183.7lb | 5980kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Hydraulic System Fluid Capacity | 35.4gal | 134L |
| Engine Oil Fluid Capacity | 2.2gal | 8L |
| Front Axle/Diff Fluid Capacity | 3gal | 11L |
| Rear Axle/Diff Fluid Capacity | 3.2gal | 12L |
| Steering Angle | 35degrees | |
| Operating Voltage | 12V | |
| Rear Axle Oscillation | 10degrees | |
| Tire Size | 14.5-20 |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Bucket Dimensions
| Breakout Force | 4400 daN | |
|---|---|---|
| Dumping Angle, Top | 45degrees | |
| Payload On Forks, Max. Turned, Frontal | 4299.02lb | 1950kg |
| Payload On Forks, Max. Turned, Max. Swivelled | 4299.02lb | 1950kg |
| Thrust Force | 4500 daN | |
| Tilting Angle | 45degrees | |
| Tipping Load Standard Bucket | 7165.03lb | 3250kg |
| Tipping Load Standard Bucket, Max. Turned, 90 | 7275.26lb | 3300kg |
| Lifting Force | 4600 daN |
05 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 390mm |
|---|---|---|
| Length With Bucket On Ground | 18.21ft in | 5550mm |
| Height To Top Of Cab | 9.06ft in | 2760mm |
| Wheelbase | 6.5ft in | 1980mm |
| Hinge Pin - Max Height | 10.77ft in | 3280mm |
| Turning Radius | 11.32ft in | 3450mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.