Specification sheet Wheel Loader Ref mecalac-as-50-wheel-loader
Mecalac AS 50
The Mecalac AS 50 is a wheel loader with an operating weight of 9,171.23 lb (4,160 kg), and a 40 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,171.23lb
4,160kg
Engine power
40hp
29.9kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mecalac AS 50 sits below the median for its class:
- Operating weight 9,170 lb lighter than 81% (n=374)
- Engine power 40 hp less powerful than 90% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | D 2011 L03i | |
|---|---|---|
| Net Power | 40hp | 29.9kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 1700 min-1 | |
| Battery | 66 Ah | |
| Alternator | 60amps |
02 Operational Specification
| Operating Weight | 9171.3lb | 4160kg |
|---|---|---|
| Fuel Capacity | 11.9gal | 45L |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Engine Oil Fluid Capacity | 1.6gal | 6L |
| Front Axle/Diff Fluid Capacity | 1.9gal | 7L |
| Rear Axle/Diff Fluid Capacity | 2gal | 7.5L |
| Steering Angle | 35degrees | |
| Operating Voltage | 12V | |
| Rear Axle Oscillation | 10degrees | |
| Tire Size | 12,5-18 |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Bucket Dimensions
| Breakout Force | 3400 daN | |
|---|---|---|
| Dumping Angle, Top | 46degrees | |
| Thrust Force | 2500 daN | |
| Tilting Angle | 45degrees | |
| Tipping Load Standard Bucket | 5313.15lb | 2410kg |
| Tipping Load Standard Bucket, Max. Turned, 90 | 4552.55lb | 2065kg |
| Lifting Force | 2400 daN | |
| Payload On Forks, Max. Turned, Frontal | 3615.59lb | 1640kg |
| Payload On Forks, Max. Turned, Max. Swivelled | 2843.97lb | 1290kg |
05 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 320mm |
|---|---|---|
| Length With Bucket On Ground | 15.97ft in | 4865mm |
| Height To Top Of Cab | 8.37ft in | 2550mm |
| Turning Radius | 9.09ft in | 2770mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.