Specification sheet Wheel Loader Ref mecalac-as-210e-wheel-loader
Mecalac AS 210E
The Mecalac AS 210E is a wheel loader with an operating weight of 33,069.34 lb (15,000 kg), and a 175 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
33,069.34lb
15,000kg
Engine power
175hp
130.5kW
Net Power ◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Mecalac AS 210E sits in the middle of its class:
- Operating weight 33,070 lb heavier than 59% (n=439)
- Engine power 175 hp more powerful than 62% (n=408)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | TCD 6.1 L6 | |
|---|---|---|
| Net Power | 175hp | 130.5kw |
| Power Measured @ | 2200rpm | |
| Battery | 2 x 88 Ah | |
| Torque Measured @ | 1450rpm | |
| Alternator | 100amps |
02 Operational Specification
| Operating Weight | 33069.4lb | 15000kg |
|---|---|---|
| Fuel Capacity | 66.1gal | 250L |
| Hydraulic System Fluid Capacity | 60.8gal | 230L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Steering Angle | 25degrees | |
| Operating Voltage | 24V | |
| Rear Axle Oscillation | 10degrees |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Bucket Dimensions
| Breakout Force | 13000 daN | |
|---|---|---|
| Dumping Angle, Top | 45degrees | |
| Thrust Force | 11300 daN | |
| Tilting Angle | 45degrees | |
| Tipping Load Standard Bucket | 17196.06lb | 7800kg |
| Tipping Load Standard Bucket, Max. Turned, 90 | 16534.67lb | 7500kg |
| Lifting Force | 10600 daN | |
| Payload On Forks, Max. Turned, Frontal | 10361.73lb | 4700kg |
| Payload On Forks, Max. Turned, Max. Swivelled | 14550.51lb | 6600kg |
05 Dimensions Dimensions
| Ground Clearance | 1.65ft in | 500mm |
|---|---|---|
| Length With Bucket On Ground | 23.48ft in | 7155mm |
| Height To Top Of Cab | 10.36ft in | 3155mm |
| Turning Radius | 16.36ft in | 4985mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.