Specification sheet Wheel Loader Ref mecalac-as-1600-wheel-loader

Mecalac AS 1600

The Mecalac AS 1600 is a wheel loader with an operating weight of 24,074.48 lb (10,920 kg), and a 136 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
24,074.48lb
10,920kg
Engine power
136hp
101.5kW
Net Power

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Mecalac AS 1600 sits at the compact end of its class:

  • Operating weight 24,070 lb lighter than 88% (n=439)
  • Engine power 136 hp less powerful than 78% (n=408)

Not positioned on bucket capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

3100B440C6580A
Side elevation

01 Engine Specification

Engine Model TCD 3,6 L4
Net Power 136hp 101.5kw
Power Measured @ 2200rpm
Battery 2 x 95 Ah
Torque Measured @ 1600rpm
Alternator 120amps

02 Operational Specification

Operating Weight 24074.5lb 10920kg
Fuel Capacity 39.7gal 150L
Hydraulic System Fluid Capacity 42.3gal 160L
Engine Oil Fluid Capacity 2.2gal 8L
Front Axle/Diff Fluid Capacity 5.6gal 21L
Rear Axle/Diff Fluid Capacity 4.9gal 18.5L
Steering Angle 35degrees
Operating Voltage 24V
Rear Axle Oscillation 10degrees
Tire Size 17,5-25

03 Transmission Specification

Max Speed - Forward 12.5mph 20km/h

04 Bucket Dimensions

Breakout Force 8000 daN
Dumping Angle, Top 53degrees
Payload On Forks, Max. Turned, Max. Swivelled 8697.24lb 3945kg
Thrust Force 9000 daN
Tilting Angle 45degrees
Tipping Load Standard Bucket 13227.74lb 6000kg
Tipping Load Standard Bucket, Max. Turned, 90 13249.79lb 6010kg
Lifting Force 6900 daN
Payload On Forks, Max. Turned, Frontal 9094.07lb 4125kg

05 Dimensions Dimensions

Ground Clearance 1.45ft in 440mm
Length With Bucket On Ground 21.59ft in 6580mm
Height To Top Of Cab 10.18ft in 3100mm
Wheelbase 7.49ft in 2280mm
Turning Radius 14.28ft in 4350mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.