Specification sheet Wheel Loader Ref mecalac-af-1050-wheel-loader
Mecalac AF 1050
The Mecalac AF 1050 is a wheel loader with an operating weight of 12,786.82 lb (5,800 kg), a 75 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,786.82lb
5,800kg
Engine power
75hp
56kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mecalac AF 1050 sits in the middle of its class:
- Operating weight 12,790 lb heavier than 53% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 78% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | Deutz TD 2.9 L4 | |
|---|---|---|
| Net Power | 75hp | 56kw |
| Power Measured @ | 2600rpm | |
| Max Torque | 300 Nm | |
| Battery | 95 Ah | |
| Torque Measured @ | 1600rpm | |
| Aspiration | Low-noise, water-cooled, turbo diesel engine |
02 Operational Specification
| Operating Weight | 12786.9lb | 5800kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Hydraulic System Fluid Capacity | 35.4gal | 134L |
| Front Axle/Diff Fluid Capacity | 3gal | 11L |
| Rear Axle/Diff Fluid Capacity | 3.2gal | 12L |
| Steering Angle | 35degrees | |
| Turning Radius | 12.2ft in | 3700mm |
| Operating Voltage | 12V | |
| Rear Axle Oscillation | 10degrees | |
| Tire Size | 14.5-20 |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 22.2gal/min | 84L/min |
|---|---|---|
| Pump Type | Single circuit hydraulics with central gear pump |
05 Bucket Dimensions
| Breakout Force | 4900 daN | |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Dumping Angle, Top | 45degrees | |
| Lifting Force | 5400 daN | |
| Payload On Forks, Max. Turned, Frontal | 5511.56lb | 2500kg |
| Thrust Force | 4650 daN | |
| Tipping Load Standard Bucket | 8377.57lb | 3800kg |
06 Dimensions Dimensions
| Ground Clearance | 1.38ft in | 420mm |
|---|---|---|
| Length With Bucket On Ground | 19.95ft in | 6080mm |
| Width Over Tires | 6.76ft in | 2060mm |
| Height To Top Of Cab | 9.32ft in | 2840mm |
| Wheelbase | 6.85ft in | 2085mm |
| Hinge Pin - Max Height | 11.98ft in | 3650mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.