Specification sheet Wheel Loader Ref manitou-ml40-wheel-loader
Manitou ML40
The Manitou ML40 is a wheel loader with an operating weight of 6,393.41 lb (2,900 kg), and a 50.96 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,393.41lb
2,900kg
Engine power
50.96hp
38kW
Gross Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Manitou ML40 sits at the compact end of its class:
- Operating weight 6,390 lb lighter than 93% (n=374)
- Engine power 51 hp less powerful than 78% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Gross Power | 51hp | 38kw |
| Max Torque | 105.5lb ft | 143Nm |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 6393.5lb | 2900kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Turning Radius | 10.4ft in | 3160mm |
| Tire Size | 10x16.5 10PR SKS |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 13.7mph | 22km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335.9psi | 23000kPa |
|---|---|---|
| Pump Flow Capacity | 13.3gal/min | 50L/min |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 6.4ft in | 1950mm |
|---|---|---|
| Bucket Width | 4.27ft in | 1300mm |
06 Dimensions Dimensions
| Ground Clearance | 0.79ft in | 240mm |
|---|---|---|
| Length With Bucket On Ground | 14.51ft in | 4420mm |
| Height To Top Of Cab | 6.44ft in | 1960mm |
| Wheelbase | 5.58ft in | 1700mm |
| Hinge Pin - Max Height | 8.86ft in | 2700mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.