Specification sheet Wheel Loader Ref liugong-zl50c-wheel-loader
LiuGong ZL50C
The LiuGong ZL50C is a wheel loader with an operating weight of 36,376.28 lb (16,500 kg), a 217.3 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
36,376.28lb
16,500kg
Engine power
217.3hp
162kW
Net Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong ZL50C sits above the median for its class:
- Operating weight 36,380 lb heavier than 71% (n=439)
- Engine power 217 hp more powerful than 88% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2538 | |
|---|---|---|
| Engine Model | WD61567G3-36 | |
| Net Power | 217.3hp | 162kw |
| Power Measured @ | 2200rpm |
02 Operational Specification
| Operating Weight | 36376.3lb | 16500kg |
|---|---|---|
| Tire Size | 23.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 8.1mph | 13km/h |
04 Hydraulic System Specification
| Pump Type | Gear |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.75ft in | 2970mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
| Breakout Force | 35969.43lb | 160kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 26.36ft in | 8034mm |
|---|---|---|
| Width Over Tires | 9.77ft in | 2976mm |
| Height To Top Of Cab | 11.43ft in | 3483mm |
| Reach At Max Lift And Dump | 3.94ft in | 1200mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.