Specification sheet Wheel Loader Ref liugong-zl30e-wheel-loader
LiuGong ZL30E
The LiuGong ZL30E is a wheel loader with an operating weight of 23,809.93 lb (10,800 kg), a 123.4 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,809.93lb
10,800kg
Engine power
123.4hp
92kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong ZL30E sits at the compact end of its class:
- Operating weight 23,810 lb lighter than 89% (n=439)
- Engine power 123 hp less powerful than 88% (n=408)
- Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2536 | |
|---|---|---|
| Engine Model | YC 6108G | |
| Net Power | 123.4hp | 92kw |
| Power Measured @ | 2200rpm |
02 Operational Specification
| Operating Weight | 23810lb | 10800kg |
|---|---|---|
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 20.6mph | 33km/h |
| Max Speed - Reverse | 8.1mph | 13km/h |
04 Hydraulic System Specification
| Pump Type | Gear |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.56ft in | 2911mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Breakout Force | 20682.43lb | 92kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 22ft in | 6703mm |
|---|---|---|
| Width Over Tires | 8.06ft in | 2456mm |
| Height To Top Of Cab | 10.59ft in | 3225mm |
| Reach At Max Lift And Dump | 3.47ft in | 1055mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.