Specification sheet Wheel Loader Ref liugong-zl18a-wheel-loader
LiuGong ZL18A
The LiuGong ZL18A is a wheel loader with an operating weight of 12,786.82 lb (5,800 kg), a 73.8 hp engine, and a 1.21 yd³ (0.92 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,786.82lb
5,800kg
Engine power
73.8hp
55kW
Net Power Bucket capacity
1.21yd³
0.92m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the LiuGong ZL18A sits in the middle of its class:
- Operating weight 12,790 lb heavier than 53% (n=374)
- Engine power 74 hp more powerful than 53% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 58% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2535 | |
|---|---|---|
| Engine Model | 4105G73 | |
| Net Power | 73.8hp | 55kw |
| Power Measured @ | 2400rpm |
02 Operational Specification
| Operating Weight | 12786.9lb | 5800kg |
|---|---|---|
| Tire Size | 16/17-20 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 19.9mph | 32km/h |
| Max Speed - Reverse | 19.9mph | 32km/h |
04 Hydraulic System Specification
| Pump Type | Gear |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.21yd3 | 0.92m3 |
| Breakout Force | 12139.69lb | 54kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 17.7ft in | 5392mm |
|---|---|---|
| Width Over Tires | 6.88ft in | 2096mm |
| Height To Top Of Cab | 9.26ft in | 2820mm |
| Reach At Max Lift And Dump | 3.45ft in | 1050mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.