LiuGong CLG904C
The LiuGong CLG904C is a mini excavator with an operating weight of 8,818.5 lb, a 36.4 hp engine, and a dig depth of 10.18 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the LiuGong CLG904C sits above the median for its class:
- Operating weight 8,820 lb heavier than 79% (n=438)
- Engine power 36 hp more powerful than 78% (n=448)
- Dig depth 10.2 ft deeper-digging than 63% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 16.87ft in | 5,142mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.82ft in | 3,603mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.13ft in | 5,221mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.12ft in | 2,170mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.18ft in | 3,103mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.99ft in | 1,521mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.32ft in | 1,622mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.05ft in | 320mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.75ft in | 1,448mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 3.24mph | 5.21km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88-SYY | |
| Gross Power | 36.4hp | 27.1kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 133.7cu in | 2,191cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 8818.5lb | 4,000kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 3045.8psi | 21,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 31.8gal/min | 120l/min‖ — metric converted from the published imperial value |
06 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.