Specification sheet Wheel Loader Ref liugong-clg888-wheel-loader

LiuGong CLG888

The LiuGong CLG888 is a wheel loader with an operating weight of 62,831.75 lb (28,500 kg), a 310 hp engine, and a 5.89 yd³ (4.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
62,831.75lb
28,500kg
Engine power
310hp
231.2kW
Net Power
Bucket capacity
5.89yd³
4.5m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the LiuGong CLG888 sits above the median for its class:

  • Operating weight 62,830 lb heavier than 74% (n=198)
  • Engine power 310 hp more powerful than 72% (n=190)
  • Bucket capacity 5.9 yd³ larger-bucket than 60% (n=174)

Scale drawingdrawn to scale · mm

3852B476C9350A
Side elevation
3852B3170D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2347
Engine Model M11-C310
Net Power 310hp 231.2kw
Power Measured @ 2100rpm
Max Torque 1051.8lb ft 1426Nm
Displacement 659.1cu in 10.8L
Torque Measured @ 1300rpm

02 Operational Specification

Operating Weight 62831.8lb 28500kg
Fuel Capacity 117.6gal 445L
Hydraulic System Fluid Capacity 66.1gal 250L
Tire Size 29.5-25

03 Transmission Specification

Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 21.8mph 35km/h
Max Speed - Reverse 15.3mph 24.5km/h

04 Hydraulic System Specification

Relief Valve Setting 3002.3psi 20700kPa
Raise Time 6.3sec
Dump Time 1.5sec
Lower Time 3.8sec
Pump Type Gear

05 Bucket Dimensions

Dump Clearance At Max Raise 10.83ft in 3300mm
Bucket Capacity - Heaped 5.89yd3 4.5m3
Bucket Width 11.31ft in 3445mm
Breakout Force 58450.33lb 260kN

06 Dimensions Dimensions

Ground Clearance 1.57ft in 476mm
Length With Bucket On Ground 30.68ft in 9350mm
Width Over Tires 10.41ft in 3170mm
Height To Top Of Cab 12.64ft in 3852mm
Wheelbase 11.59ft in 3530mm
Hinge Pin - Max Height 14.62ft in 4455mm
Reach At Max Lift And Dump 4.97ft in 1513mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.