Specification sheet Wheel Loader Ref liugong-clg877-iii-wheel-loader
LiuGong CLG877 III
The LiuGong CLG877 III is a wheel loader with an operating weight of 51,808.63 lb (23,500 kg), a 260.2 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,808.63lb
23,500kg
Engine power
260.2hp
194kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the LiuGong CLG877 III sits in the middle of its class:
- Operating weight 51,810 lb lighter than 58% (n=198)
- Engine power 260 hp less powerful than 71% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSM11-C290 | |
| Net Power | 260.2hp | 194kw |
| Power Measured @ | 2100rpm | |
| Displacement | 659.1cu in | 10.8L |
02 Operational Specification
| Operating Weight | 51808.7lb | 23500kg |
|---|---|---|
| Static Tipping Weight | 33730.8lb | 15300kg |
| Turning Radius | 23.9ft in | 7260mm |
| Tire Size | 26.5x25 |
03 Transmission Specification
| Transmission Type | Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 10.5ft in | 3200mm |
|---|---|---|
| Bucket Width | 10.34ft in | 3150mm |
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 458mm |
|---|---|---|
| Length With Bucket On Ground | 29.78ft in | 9075mm |
| Width Over Tires | 9.6ft in | 2926mm |
| Height To Top Of Cab | 11.75ft in | 3580mm |
| Wheelbase | 11.32ft in | 3450mm |
| Reach At Max Lift And Dump | 4.27ft in | 1300mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.