Specification sheet Wheel Loader Ref liugong-clg856-wheel-loader
LiuGong CLG856
The LiuGong CLG856 is a wheel loader with an operating weight of 37,037.66 lb (16,800 kg), a 214.6 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
37,037.66lb
16,800kg
Engine power
214.6hp
160kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong CLG856 sits above the median for its class:
- Operating weight 37,040 lb heavier than 73% (n=439)
- Engine power 215 hp more powerful than 86% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CTA8.3-C215 | |
| Net Power | 214.6hp | 160kw |
| Power Measured @ | 2200rpm | |
| Displacement | 506.5cu in | 8.3L |
02 Operational Specification
| Operating Weight | 37037.7lb | 16800kg |
|---|---|---|
| Static Tipping Weight | 23148.6lb | 10500kg |
| Turning Radius | 22.7ft in | 6913mm |
| Tire Size | 23.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 14.3mph | 23km/h |
04 Hydraulic System Specification
| Pump Type | Gear |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.18ft in | 3100mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Width | 9.77ft in | 2976mm |
| Breakout Force | 35969.43lb | 160kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 431mm |
|---|---|---|
| Length With Bucket On Ground | 26.45ft in | 8060mm |
| Width Over Tires | 9.03ft in | 2750mm |
| Height To Top Of Cab | 11.38ft in | 3467mm |
| Wheelbase | 10.67ft in | 3250mm |
| Reach At Max Lift And Dump | 3.4ft in | 1035mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.