Specification sheet Wheel Loader Ref liugong-clg842-ii-wheel-loader
LiuGong CLG842 II
The LiuGong CLG842 II is a wheel loader with an operating weight of 30,203.33 lb (13,700 kg), a 155.6 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
30,203.33lb
13,700kg
Engine power
155.6hp
116kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong CLG842 II sits in the middle of its class:
- Operating weight 30,200 lb lighter than 54% (n=439)
- Engine power 156 hp less powerful than 58% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSB5.9-C175 | |
| Net Power | 155.6hp | 116kw |
| Power Measured @ | 2200rpm | |
| Displacement | 360.1cu in | 5.9L |
02 Operational Specification
| Operating Weight | 30203.4lb | 13700kg |
|---|---|---|
| Static Tipping Weight | 17637lb | 8000kg |
| Turning Radius | 20.6ft in | 6250mm |
| Tire Size | 20.5x25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.5mph | 37.7km/h |
| Max Speed - Reverse | 16mph | 25.6km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.52ft in | 2900mm |
|---|---|---|
| Bucket Width | 9.08ft in | 2766mm |
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 24.65ft in | 7511mm |
| Width Over Tires | 8.01ft in | 2440mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 9.85ft in | 3000mm |
| Reach At Max Lift And Dump | 3.4ft in | 1034mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.