Specification sheet Wheel Loader Ref liugong-clg835-wheel-loader
LiuGong CLG835
The LiuGong CLG835 is a wheel loader with an operating weight of 24,691.78 lb (11,200 kg), a 111.4 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,691.78lb
11,200kg
Engine power
111.4hp
83kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong CLG835 sits below the median for its class:
- Operating weight 24,690 lb lighter than 85% (n=439)
- Engine power 111 hp less powerful than 97% (n=408)
- Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BT5.9 | |
| Net Power | 111.4hp | 83kw |
| Power Measured @ | 2200rpm | |
| Displacement | 360.1cu in | 5.9L |
02 Operational Specification
| Operating Weight | 24691.8lb | 11200kg |
|---|---|---|
| Static Tipping Weight | 14330.1lb | 6500kg |
| Turning Radius | 18.5ft in | 5618mm |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.4mph | 36km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Hydraulic System Specification
| Pump Type | Gear |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.56ft in | 2911mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.06ft in | 2456mm |
| Breakout Force | 21019.64lb | 93.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.03ft in | 312mm |
|---|---|---|
| Length With Bucket On Ground | 22.18ft in | 6760mm |
| Width Over Tires | 7.55ft in | 2300mm |
| Height To Top Of Cab | 10.7ft in | 3260mm |
| Wheelbase | 9.19ft in | 2800mm |
| Reach At Max Lift And Dump | 3.55ft in | 1080mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.