Specification sheet Wheel Loader Ref liugong-clg835-ii-wheel-loader

LiuGong CLG835 II

The LiuGong CLG835 II is a wheel loader with an operating weight of 25,573.63 lb (11,600 kg), a 130 hp engine, and a 2.23 yd³ (1.7 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
25,573.63lb
11,600kg
Engine power
130hp
97kW
Net Power
Bucket capacity
2.23yd³
1.7m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the LiuGong CLG835 II sits below the median for its class:

  • Operating weight 25,570 lb lighter than 80% (n=439)
  • Engine power 130 hp less powerful than 84% (n=408)
  • Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)

Scale drawingdrawn to scale · mm

3260B465C6940A
Side elevation
3260B2300D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2347
Engine Model QSB5.9-C130
Net Power 130hp 97kw
Power Measured @ 2200rpm
Max Torque 399.8lb ft 542Nm
Displacement 360.1cu in 5.9L
Torque Measured @ 1400rpm

02 Operational Specification

Operating Weight 25573.7lb 11600kg
Fuel Capacity 52.9gal 200L
Hydraulic System Fluid Capacity 39.7gal 150L
Engine Oil Fluid Capacity 3.2gal 12L
Transmission Fluid Capacity 10.6gal 40L
Front Axle/Diff Fluid Capacity 7.4gal 28L
Rear Axle/Diff Fluid Capacity 7.4gal 28L
Static Tipping Weight 14550.6lb 6600kg
Turning Radius 16.3ft in 4960mm
Tire Size 17.5-25

03 Transmission Specification

Transmission Type counter shaft type powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 23mph 37km/h
Max Speed - Reverse 14.3mph 23km/h

04 Hydraulic System Specification

Relief Valve Setting 2320.7psi 16000kPa
Raise Time 4.8sec
Dump Time 1.1sec
Lower Time 2.9sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.56ft in 2911mm
Bucket Capacity - Heaped 2.23yd3 1.7m3
Bucket Width 8.09ft in 2465mm
Breakout Force 21019.64lb 93.5kN

06 Dimensions Dimensions

Ground Clearance 1.53ft in 465mm
Length With Bucket On Ground 22.77ft in 6940mm
Width Over Tires 7.55ft in 2300mm
Height To Top Of Cab 10.7ft in 3260mm
Wheelbase 9.19ft in 2800mm
Hinge Pin - Max Height 12.21ft in 3721mm
Reach At Max Lift And Dump 3.55ft in 1080mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.