Specification sheet Wheel Loader Ref link-belt-l130-wheel-loader
Link-Belt L130
The Link-Belt L130 is a wheel loader with an operating weight of 30,305 lb (13,746.12 kg), a 166 hp engine, and a 3.2 yd³ (2.45 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
30,305lb
13,746.12kg
Engine power
166hp
123.8kW
Net Power Bucket capacity
3.2yd³
2.45m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Link-Belt L130 sits in the middle of its class:
- Operating weight 30,310 lb lighter than 53% (n=439)
- Engine power 166 hp more powerful than 50% (n=408)
- Bucket capacity 3.2 yd³ larger-bucket than 50% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BTA5.9 | |
| Net Power | 166hp | 123.8kw |
| Gross Power | 173hp | 129.1kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 566lb ft | 767.4Nm |
| Displacement | 360cu in | 5.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharged with Intercooler |
02 Operational Specification
| Operating Weight | 30305lb | 13746.2kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Hydraulic System Fluid Capacity | 42.3gal | 160L |
| Engine Oil Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle/Diff Fluid Capacity | 4gal | 15L |
| Rear Axle/Diff Fluid Capacity | 4gal | 15L |
| Static Tipping Weight | 23283lb | 10561kg |
| Turning Radius | 19.9ft in | 6045mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.7mph | 35km/h |
| Max Speed - Reverse | 14.9mph | 24km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 4060psi | 27992.7kPa |
|---|---|---|
| Pump Flow Capacity | 55gal/min | 208.2L/min |
| Raise Time | 5.5sec | |
| Dump Time | 2.2sec | |
| Lower Time | 3sec | |
| Pump Type | Variable Displacement |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.34ft in | 2845mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.2yd3 | 2.45m3 |
| Breakout Force | 27876lb | 124kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 432mm |
|---|---|---|
| Length With Bucket On Ground | 24.51ft in | 7468mm |
| Width Over Tires | 8.34ft in | 2540mm |
| Height To Top Of Cab | 11.17ft in | 3404mm |
| Wheelbase | 10.84ft in | 3302mm |
| Hinge Pin - Max Height | 13ft in | 3962mm |
| Reach At Max Lift And Dump | 3.51ft in | 1067mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.