Specification sheet Wheel Loader Ref link-belt-l125-wheel-loader
Link-Belt L125
The Link-Belt L125 is a wheel loader with an operating weight of 24,912 lb (11,299.9 kg), a 130 hp engine, and a 2.6 yd³ (1.99 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,912lb
11,299.9kg
Engine power
130hp
97kW
Net Power Bucket capacity
2.6yd³
1.99m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Link-Belt L125 sits below the median for its class:
- Operating weight 24,910 lb lighter than 84% (n=439)
- Engine power 130 hp less powerful than 84% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BTA5.9 | |
| Net Power | 130hp | 97kw |
| Gross Power | 135hp | 100.7kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 419lb ft | 568.1Nm |
| Displacement | 360cu in | 5.9L |
| Torque Measured @ | 1600rpm | |
| Aspiration | Turbocharged with Intercooler |
02 Operational Specification
| Operating Weight | 24912lb | 11299.9kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Hydraulic System Fluid Capacity | 31.8gal | 120L |
| Engine Oil Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle/Diff Fluid Capacity | 3.5gal | 13L |
| Rear Axle/Diff Fluid Capacity | 3.5gal | 13L |
| Static Tipping Weight | 19450lb | 8822.4kg |
| Turning Radius | 18.2ft in | 5526mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.2mph | 37.4km/h |
| Max Speed - Reverse | 15.1mph | 24.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 4060psi | 27992.7kPa |
|---|---|---|
| Pump Flow Capacity | 32gal/min | 121.2L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.8sec | |
| Lower Time | 3.8sec | |
| Pump Type | Variable Displacement |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.51ft in | 2896mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.6yd3 | 1.99m3 |
| Breakout Force | 22031lb | 98kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 432mm |
|---|---|---|
| Length With Bucket On Ground | 22.26ft in | 6782mm |
| Width Over Tires | 7.67ft in | 2337mm |
| Height To Top Of Cab | 10.67ft in | 3251mm |
| Wheelbase | 9.51ft in | 2896mm |
| Hinge Pin - Max Height | 12.59ft in | 3835mm |
| Reach At Max Lift And Dump | 3.17ft in | 965mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.