Specification sheet Wheel Loader Ref link-belt-l120-wheel-loader
Link-Belt L120
The Link-Belt L120 is a wheel loader with an operating weight of 20,507 lb (9,301.82 kg), a 106 hp engine, and a 2 yd³ (1.53 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,507lb
9,301.82kg
Engine power
106hp
79.1kW
Net Power Bucket capacity
2yd³
1.53m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Link-Belt L120 sits at the heavy end of its class:
- Operating weight 20,510 lb heavier than 91% (n=374)
- Engine power 106 hp more powerful than 86% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 4BTA3.9 | |
| Net Power | 106hp | 79.1kw |
| Gross Power | 110hp | 82.1kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 305lb ft | 413.6Nm |
| Displacement | 239cu in | 4L |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharged and Intercooled |
02 Operational Specification
| Operating Weight | 20507lb | 9301.9kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Hydraulic System Fluid Capacity | 31.8gal | 120L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Transmission Fluid Capacity | 4.5gal | 17L |
| Front Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Rear Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Static Tipping Weight | 14559lb | 6603.9kg |
| Turning Radius | 17.4ft in | 5286mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5 R25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.1mph | 35.6km/h |
| Max Speed - Reverse | 15.5mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 4060psi | 27992.7kPa |
|---|---|---|
| Pump Flow Capacity | 32gal/min | 121.2L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.8sec | |
| Pump Type | Variable Displacement |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.17ft in | 2794mm |
|---|---|---|
| Bucket Capacity - Heaped | 2yd3 | 1.53m3 |
| Breakout Force | 19108lb | 85kN |
06 Dimensions Dimensions
| Ground Clearance | 1.34ft in | 406mm |
|---|---|---|
| Length With Bucket On Ground | 21.5ft in | 6553mm |
| Width Over Tires | 7.34ft in | 2235mm |
| Height To Top Of Cab | 10.09ft in | 3073mm |
| Wheelbase | 9ft in | 2743mm |
| Hinge Pin - Max Height | 12.09ft in | 3683mm |
| Reach At Max Lift And Dump | 3.09ft in | 940mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.