Specification sheet Wheel Loader Ref liebherr-l586-2plus2-wheel-loader
Liebherr L586 2plus2
The Liebherr L586 2plus2 is a wheel loader with an operating weight of 69,181.07 lb (31,380 kg), a 335.26 hp engine, and a 7.2 yd³ (5.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
69,181.07lb
31,380kg
Engine power
335.26hp
250kW
Gross Power Bucket capacity
7.2yd³
5.5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Liebherr L586 2plus2 sits at the heavy end of its class:
- Operating weight 69,180 lb heavier than 92% (n=198)
- Engine power 335 hp more powerful than 87% (n=190)
- Bucket capacity 7.2 yd³ larger-bucket than 92% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2245 | |
|---|---|---|
| Engine Model | D 936 L A6 | |
| Gross Power | 335.3hp | 250kw |
| Max Torque | 1172.8lb ft | 1590Nm |
| Displacement | 642cu in | 10.6L |
| Aspiration | turbo-charged |
02 Operational Specification
| Operating Weight | 69181.1lb | 31380kg |
|---|---|---|
| Fuel Capacity | 132.1gal | 500L |
| Hydraulic System Fluid Capacity | 92.5gal | 350L |
| Engine Oil Fluid Capacity | 11.4gal | 43L |
| Cooling System Fluid Capacity | 15.6gal | 59L |
| Transmission Fluid Capacity | 3.1gal | 11.5L |
| Front Axle/Diff Fluid Capacity | 23.8gal | 90L |
| Rear Axle/Diff Fluid Capacity | 14.8gal | 56L |
| Static Tipping Weight | 99318.3lb | 45050kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 29.5R25 |
03 Transmission Specification
| Max Speed - Forward | 21.8mph | 35km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 108.4gal/min | 410L/min |
|---|---|---|
| Raise Time | 7sec | |
| Dump Time | 3.5sec | |
| Lower Time | 5.5sec | |
| Pump Type | Load-sensing swash plate type variable flow pump with output and flow control and pressure cut-off in the control block |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.86ft in | 3310mm |
|---|---|---|
| Breakout Force | _- | 235kN |
| Bucket Capacity - Heaped | 7.2yd3 | 5.5m3 |
| Bucket Width | 11.16ft in | 3400mm |
06 Dimensions Dimensions
| Ground Clearance | 1.89ft in | 575mm |
|---|---|---|
| Length With Bucket On Ground | 32.58ft in | 9930mm |
| Height To Top Of Cab | 12.28ft in | 3740mm |
| Wheelbase | 12.8ft in | 3900mm |
| Hinge Pin - Max Height | 15.23ft in | 4640mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.