Specification sheet Wheel Loader Ref liebherr-l580-wheel-loader
Liebherr L580
The Liebherr L580 is a wheel loader with an operating weight of 55,510 lb (25,178.92 kg), a 288 hp engine, and a 6.5 yd³ (4.97 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
55,510lb
25,178.92kg
Engine power
288hp
214.77kW
Gross Power Bucket capacity
6.5yd³
4.97m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Liebherr L580 sits in the middle of its class:
- Operating weight 55,510 lb heavier than 57% (n=198)
- Engine power 288 hp more powerful than 58% (n=190)
- Bucket capacity 6.5 yd³ larger-bucket than 80% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Model | D936 A7 | |
| Gross Power | 288hp | 214.8kw |
| Max Torque | 1033 lb ft | |
| Displacement | 642cu in | 10.6L |
| Torque Measured @ | 1100rpm |
02 Operational Specification
| Operating Weight | 55510lb | 25179kg |
|---|---|---|
| Fuel Capacity | 106gal | 401.3L |
| Hydraulic System Fluid Capacity | 70gal | 265L |
| Engine Oil Fluid Capacity | 11.6gal | 44L |
| Cooling System Fluid Capacity | 13.7gal | 51.9L |
| Transmission Fluid Capacity | 3gal | 11.4L |
| Front Axle/Diff Fluid Capacity | 11.1gal | 42.1L |
| Rear Axle/Diff Fluid Capacity | 11.1gal | 42.1L |
| Static Tipping Weight | 40785lb | 18499.8kg |
| Tire Size | 26.5 R 25 |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.9mph | 40.1km/h |
| Max Speed - Reverse | 24.9mph | 40.1km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 77gal/min | 291.5L/min |
|---|---|---|
| Raise Time | 5.5sec | |
| Dump Time | 2sec | |
| Lower Time | 3.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.11ft in | 3081.53mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.5yd3 | 4.97m3 |
| Bucket Width | 10.1ft in | 3078.48mm |
| Breakout Force | 42715lb | 190.01kN |
06 Dimensions Dimensions
| Ground Clearance | 1.9ft in | 579.12mm |
|---|---|---|
| Length With Bucket On Ground | 31.8ft in | 9692.64mm |
| Height To Top Of Cab | 11.9ft in | 3627.12mm |
| Wheelbase | 12.1ft in | 3688.08mm |
| Hinge Pin - Max Height | 15ft in | 4572mm |
| Reach At Max Lift And Dump | 3.9ft in | 1188.72mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.