Specification sheet Wheel Loader Ref liebherr-l580-loghandler-xpower-wheel-loader
Liebherr L580 LOGHANDLER XPOWER
The Liebherr L580 LOGHANDLER XPOWER is a wheel loader with an operating weight of 80,800 lb (36,650.27 kg), a 335 hp engine, a 7.8 yd³ (5.97 m³) bucket, and a dig depth of 4 ft (1,219.2 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
80,800lb
36,650.27kg
Engine power
335hp
249.9kW
Net Power Bucket capacity
7.8yd³
5.97m³
Dig depth
4ft
1,219.2mm
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Liebherr L580 LOGHANDLER XPOWER sits at the heavy end of its class:
- Operating weight 80,800 lb heavier than 98% (n=198)
- Engine power 335 hp more powerful than 86% (n=190)
- Bucket capacity 7.8 yd³ larger-bucket than 96% (n=174)
◇Scale drawingdrawn to scale · mm
01 Electrical System Specification
| Alternator | 28/140 (V/A) | |
|---|---|---|
| Voltage | 24 VV | |
| Starter | 24/10.5 (V/HP) | |
| Battery | 2 x 180 Ah |
02 Engine Specification
| Fuel Injection | Electronic Common Rail high-pressure injection | |
|---|---|---|
| Number Of Cylinders | 6 | |
| Engine Model | D936 A7 | |
| Net Power | 335hp | 249.9kw |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display | |
| Gross Power | 339hp | 252.8kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 1450 lb ft | |
| Displacement | 642cu in | 10.6L |
| Torque Measured @ | 1000rpm | |
| Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology | |
| Bore | 4.8in | 122mm |
| Stroke | 6in | 150.2mm |
03 Operational Specification
| Operating Weight | 80800lb | 36650.3kg |
|---|---|---|
| Fuel Capacity | 96gal | 363.4L |
| Hydraulic System Fluid Capacity | 60.8gal | 230.2L |
| Engine Oil Fluid Capacity | 10.6gal | 40.2L |
| Cooling System Fluid Capacity | 19.3gal | 73.1L |
| Hydraulic Fluid Capacity | 25.1gal | 95.1L |
| Front Axle/Diff Fluid Capacity | 15.3gal | 58L |
| Rear Axle/Diff Fluid Capacity | 15.3gal | 58L |
| Static Tipping Weight | 47620lb | 21600.1kg |
| Tire Size | 800/65R29 Michelin XLD65 |
04 Transmission Specification
| Max Speed - Forward | 24.9mph | 40.1km/h |
|---|---|---|
| Max Speed - Reverse | 24.9mph | 40.1km/h |
05 Hydraulic System Specification
| Max Operating Pressure | 5076 psi | |
|---|---|---|
| Relief Valve Setting | 4351.2psi | 30000kPa |
| Pump Flow Capacity | 111gal/min | 420.2L/min |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
06 Bucket Dimensions
| Dump Clearance At Max Raise | 10.8ft in | 3291.84mm |
|---|---|---|
| Arm Length | 10.4ft in | 3169.92mm |
| Bucket Capacity - Heaped | 7.8yd3 | 5.97m3 |
| Bucket Width | 11.3ft in | 3444.24mm |
| Digging Depth | 4ft in | 1219.2mm |
07 Dimensions Dimensions
| Ground Clearance | 1ft in | 304.8mm |
|---|---|---|
| Length With Bucket On Ground | 34.3ft in | 10454.64mm |
| Height To Top Of Cab | 11.9ft in | 3627.12mm |
| Wheelbase | 12.2ft in | 3718.56mm |
| Reach At Max Lift And Dump | 9ft in | 2743.2mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.