Specification sheet Wheel Loader Ref liebherr-l576-2plus2-wheel-loader
Liebherr L576 2plus2
The Liebherr L576 2plus2 is a wheel loader with an operating weight of 53,484.15 lb (24,260 kg), a 268.21 hp engine, and a 5.89 yd³ (4.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
53,484.15lb
24,260kg
Engine power
268.21hp
200kW
Gross Power Bucket capacity
5.89yd³
4.5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Liebherr L576 2plus2 sits in the middle of its class:
- Operating weight 53,480 lb heavier than 51% (n=198)
- Engine power 268 hp less powerful than 58% (n=190)
- Bucket capacity 5.9 yd³ larger-bucket than 60% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2245 | |
| Engine Model | D 936 L A6 | |
| Gross Power | 268.3hp | 200kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 973.6lb ft | 1320Nm |
| Displacement | 642cu in | 10.6L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbo-charged |
02 Operational Specification
| Operating Weight | 53484.2lb | 24260kg |
|---|---|---|
| Fuel Capacity | 105.7gal | 400L |
| Hydraulic System Fluid Capacity | 68.7gal | 260L |
| Engine Oil Fluid Capacity | 11.4gal | 43L |
| Cooling System Fluid Capacity | 13.8gal | 52L |
| Front Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Rear Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Static Tipping Weight | lb | 19570kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5R25 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed - Reverse | 24.9mph | 40km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 5076.4psi | 35000kPa |
|---|---|---|
| Pump Flow Capacity | 76.7gal/min | 290L/min |
| Raise Time | 5.5sec | |
| Dump Time | 2sec | |
| Lower Time | 3.5sec | |
| Pump Type | Load-sensing swash plate type variable flow pump with output and flow control and pressure cut-off in the control block |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.46ft in | 3187mm |
|---|---|---|
| Breakout Force | _- | 190kN |
| Bucket Capacity - Heaped | 5.89yd3 | 4.5m3 |
| Bucket Width | 9.85ft in | 3000mm |
06 Dimensions Dimensions
| Ground Clearance | 1.86ft in | 565mm |
|---|---|---|
| Length With Bucket On Ground | 29.51ft in | 8992mm |
| Height To Top Of Cab | 11.65ft in | 3550mm |
| Wheelbase | 11.75ft in | 3580mm |
| Hinge Pin - Max Height | 14.31ft in | 4360mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.