Specification sheet Wheel Loader Ref liebherr-l564t-wheel-loader

Liebherr L564T

The Liebherr L564T is a wheel loader with an operating weight of 49,471.74 lb (22,440 kg), a 249 hp engine, and a 4.58 yd³ (3.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
49,471.74lb
22,440kg
Engine power
249hp
185.68kW
Gross Power
Bucket capacity
4.58yd³
3.5m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Liebherr L564T sits below the median for its class:

  • Operating weight 49,470 lb lighter than 77% (n=198)
  • Engine power 249 hp less powerful than 83% (n=190)
  • Bucket capacity 4.6 yd³ smaller-bucket than 90% (n=174)

Scale drawingdrawn to scale · mm

3540B550C8765A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2245
Engine Model D 926 TI-E A2
Gross Power 249hp 185.7kw
Power Measured @ 2000rpm
Aspiration In-line engine, water-cooled, exhaust turbo-charged and inter-cooled

02 Operational Specification

Operating Weight 49471.8lb 22440kg
Fuel Capacity 87.2gal 330L
Hydraulic System Fluid Capacity 33.1gal 125L
Static Tipping Weight 37974.7lb 17225kg
Turning Radius 22.7ft in 6900mm
Operating Voltage 24V
Alternator Supplied Amperage 55amps
Tire Size 23.5 R 25 Michelin XLD-D2 L5

03 Transmission Specification

Transmission Type Stepless hydrostatic 2plus2
Max Speed - Forward 24.9mph 40km/h

04 Hydraulic System Specification

Relief Valve Setting 4713.8psi 32500kPa
Pump Flow Capacity 76.7gal/min 290L/min
Pump Type Load sensing, variable axial piston pump

05 Bucket Dimensions

Dump Clearance At Max Raise 10.93ft in 3330mm
Bucket Capacity - Heaped 4.58yd3 3.5m3
Bucket Width 9.85ft in 3000mm
Breakout Force 46310.64lb 206kN

06 Dimensions Dimensions

Ground Clearance 1.81ft in 550mm
Length With Bucket On Ground 28.76ft in 8765mm
Height To Top Of Cab 11.62ft in 3540mm
Wheelbase 11.32ft in 3450mm
Hinge Pin - Max Height 14.29ft in 4355mm
Reach At Max Lift And Dump 3.6ft in 1095mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.