Specification sheet Wheel Loader Ref liebherr-l544t-wheel-loader

Liebherr L544T

The Liebherr L544T is a wheel loader with an operating weight of 35,053.51 lb (15,900 kg), a 165 hp engine, and a 3.67 yd³ (2.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
35,053.51lb
15,900kg
Engine power
165hp
123.05kW
Gross Power
Bucket capacity
3.67yd³
2.8m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Liebherr L544T sits above the median for its class:

  • Operating weight 35,050 lb heavier than 67% (n=439)
  • Engine power 165 hp more powerful than 50% (n=408)
  • Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)

Scale drawingdrawn to scale · mm

3355B530C7975A
Side elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2245
Engine Model D 924 T-E A2
Gross Power 165hp 123.1kw
Power Measured @ 2000rpm
Aspiration in-line engine, water-cooled, exhaust turbo-charged

02 Operational Specification

Operating Weight 35053.6lb 15900kg
Fuel Capacity 68.7gal 260L
Hydraulic System Fluid Capacity 30.4gal 115L
Static Tipping Weight 31239.6lb 14170kg
Turning Radius 20.5ft in 6220mm
Operating Voltage 24V
Alternator Supplied Amperage 55amps
Tire Size 23.5 R 25 Michelin XLD-D2 L5

03 Transmission Specification

Transmission Type hydrostatic 2plus2
Max Speed - Forward 24.9mph 40km/h

04 Hydraulic System Specification

Relief Valve Setting 4206.1psi 29000kPa
Pump Flow Capacity 60.8gal/min 230L/min
Pump Type Load sensing variable axial piston pump

05 Bucket Dimensions

Dump Clearance At Max Raise 9.75ft in 2970mm
Bucket Capacity - Heaped 3.67yd3 2.8m3
Bucket Width 8.86ft in 2700mm
Breakout Force 30349.21lb 135kN

06 Dimensions Dimensions

Ground Clearance 1.74ft in 530mm
Length With Bucket On Ground 26.17ft in 7975mm
Height To Top Of Cab 11.01ft in 3355mm
Wheelbase 10.34ft in 3150mm
Hinge Pin - Max Height 12.85ft in 3915mm
Reach At Max Lift And Dump 3.25ft in 990mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.