Specification sheet Wheel Loader Ref liebherr-l534-wheel-loader
Liebherr L534
The Liebherr L534 is a wheel loader with an operating weight of 26,675.94 lb (12,100 kg), a 134.2 hp engine, and a 3.14 yd³ (2.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
26,675.94lb
12,100kg
Engine power
134.2hp
100kW
Net Power Bucket capacity
3.14yd³
2.4m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Liebherr L534 sits below the median for its class:
- Operating weight 26,680 lb lighter than 75% (n=439)
- Engine power 134 hp less powerful than 80% (n=408)
- Bucket capacity 3.1 yd³ smaller-bucket than 53% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2245 | |
| Engine Model | D504Ti | |
| Net Power | 134.2hp | 100kw |
| Power Measured @ | 2400rpm | |
| Displacement | 274.7cu in | 4.5L |
02 Operational Specification
| Operating Weight | 26676lb | 12100kg |
|---|---|---|
| Static Tipping Weight | 19014.9lb | 8625kg |
| Turning Radius | 9.6ft in | 2912mm |
| Tire Size | 20.5R25 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.2mph | 34km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.49ft in | 2890mm |
|---|---|---|
| Bucket Width | 8.21ft in | 2500mm |
| Bucket Capacity - Heaped | 3.14yd3 | 2.4m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 23.74ft in | 7235mm |
| Width Over Tires | 7.88ft in | 2400mm |
| Height To Top Of Cab | 10.67ft in | 3250mm |
| Wheelbase | 9.52ft in | 2900mm |
| Reach At Max Lift And Dump | 3.11ft in | 945mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.