Specification sheet Wheel Loader Ref liebherr-l510st-wheel-loader
Liebherr L510ST
The Liebherr L510ST is a wheel loader with an operating weight of 13,778.9 lb (6,250 kg), a 77.8 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,778.9lb
6,250kg
Engine power
77.8hp
58kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Liebherr L510ST sits in the middle of its class:
- Operating weight 13,780 lb heavier than 60% (n=374)
- Engine power 78 hp more powerful than 62% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2245 | |
| Engine Model | D405T | |
| Net Power | 77.8hp | 58kw |
| Power Measured @ | 2800rpm | |
| Displacement | 164.8cu in | 2.7L |
02 Operational Specification
| Operating Weight | 13778.9lb | 6250kg |
|---|---|---|
| Static Tipping Weight | 10099.4lb | 4581kg |
| Turning Radius | 6.9ft in | 2095mm |
| Tire Size | 405/70R20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.78ft in | 2676mm |
|---|---|---|
| Bucket Width | 7.65ft in | 2330mm |
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 18.9ft in | 5760mm |
| Width Over Tires | 7.32ft in | 2230mm |
| Height To Top Of Cab | 9.14ft in | 2785mm |
| Wheelbase | 7.55ft in | 2300mm |
| Reach At Max Lift And Dump | 2.87ft in | 874mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.