Specification sheet Wheel Loader Ref liebherr-l507st-wheel-loader
Liebherr L507ST
The Liebherr L507ST is a wheel loader with an operating weight of 11,552.23 lb (5,240 kg), a 61.7 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,552.23lb
5,240kg
Engine power
61.7hp
46kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Liebherr L507ST sits in the middle of its class:
- Operating weight 11,550 lb lighter than 57% (n=374)
- Engine power 62 hp less powerful than 60% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2245 | |
| Engine Model | D404T | |
| Net Power | 61.7hp | 46kw |
| Power Measured @ | 2800rpm | |
| Displacement | 166.6cu in | 2.8L |
02 Operational Specification
| Operating Weight | 11552.3lb | 5240kg |
|---|---|---|
| Static Tipping Weight | 7718.4lb | 3501kg |
| Turning Radius | 6.2ft in | 1877mm |
| Tire Size | 365/70R18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Width | 5.91ft in | 1800mm |
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.07ft in | 325mm |
|---|---|---|
| Length With Bucket On Ground | 17.07ft in | 5200mm |
| Width Over Tires | 5.86ft in | 1785mm |
| Height To Top Of Cab | 8.86ft in | 2700mm |
| Wheelbase | 7.06ft in | 2150mm |
| Reach At Max Lift And Dump | 2.76ft in | 840mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.