Specification sheet Wheel Loader Ref liebherr-l506st-wheel-loader
Liebherr L506ST
The Liebherr L506ST is a wheel loader with an operating weight of 11,287.67 lb (5,120 kg), a 56.4 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,287.67lb
5,120kg
Engine power
56.4hp
42kW
Net Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Liebherr L506ST sits in the middle of its class:
- Operating weight 11,290 lb lighter than 59% (n=374)
- Engine power 56 hp less powerful than 71% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2245 | |
| Engine Model | D404T | |
| Net Power | 56.4hp | 42kw |
| Power Measured @ | 2800rpm | |
| Displacement | 148.9cu in | 2.5L |
02 Operational Specification
| Operating Weight | 11287.7lb | 5120kg |
|---|---|---|
| Static Tipping Weight | 7123.2lb | 3231kg |
| Turning Radius | 6.1ft in | 1845mm |
| Tire Size | 365/70R18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.14ft in | 2480mm |
|---|---|---|
| Bucket Width | 5.91ft in | 1800mm |
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
05 Dimensions Dimensions
| Ground Clearance | 0.99ft in | 300mm |
|---|---|---|
| Length With Bucket On Ground | 17.08ft in | 5205mm |
| Width Over Tires | 5.81ft in | 1770mm |
| Height To Top Of Cab | 8.76ft in | 2670mm |
| Wheelbase | 7.06ft in | 2150mm |
| Reach At Max Lift And Dump | 2.76ft in | 840mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.