Kubota U35S2
The Kubota U35S2 is a mini excavator with an operating weight of 8,267.4 lb, a 26.9 hp engine, and a dig depth of 17.26 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota U35S2 sits above the median for its class:
- Operating weight 8,270 lb heavier than 76% (n=438)
- Engine power 27 hp more powerful than 62% (n=448)
- Dig depth 17.3 ft deeper-digging than 100% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 16.88ft in | 5,145mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 17.26ft in | 5,261mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.73ft in | 1,442mm‖ — metric converted from the published imperial value |
|---|---|---|
| Height To Top Of Cab | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Ground Pressure | 4.89psi | 33.7kpa‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.86mph | 4.6km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Model | D1703-M-E3-BH-VS1 | |
|---|---|---|
| Gross Power | 28.2hp | 21kw‖ — metric converted from the published imperial value |
| Net Power | 26.9hp | 20.1kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2250rpm | |
| Displacement | 100.6cu in | 1,649cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 8267.4lb | 3,750kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 10.6gal | 40.1l‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.9rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.