Kubota U35-4G
The Kubota U35-4G is a mini excavator with a 23.9 hp engine, and a dig depth of 9.75 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota U35-4G sits in the middle of its class:
- Engine power 24 hp more powerful than 50% (n=448)
- Dig depth 9.8 ft deeper-digging than 57% (n=426)
Not positioned on operating weight — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 6.61ft in | 2,015mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 9.75ft in | 2,972mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 11.06ft in | 3,371mm‖ — metric converted from the published imperial value |
| Mximum Dig Radius | 207.56in | 5,272mm‖ — metric converted from the published imperial value |
| Max Digging Height | 15.9ft in | 4,846mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Ground Clearance | 0.95ft in | 290mm‖ — metric converted from the published imperial value |
|---|---|---|
| Tail Swing Radius | 2.96ft in | 902mm‖ — metric converted from the published imperial value |
| Overall Height | 8.11ft in | 2,472mm‖ — metric converted from the published imperial value |
| Overall Length | 15.59ft in | 4,752mm‖ — metric converted from the published imperial value |
| Overall Width | 66.93in | 1,700mm‖ — metric converted from the published imperial value |
| Crawler Length | 6.84ft in | 2,085mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 4.89psi | 33.7kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | D1703M-DI-E4 | |
| Gross Power | 24.8hp | 18.5kw‖ — metric converted from the published imperial value |
| Net Power | 23.9hp | 17.8kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 6132.9cu in | 100,500cm3‖ — metric converted from the published imperial value |
| Model Name | U35-4G |
05 Operational Specification
| Auxiliary Hydraulic Flow | 15.9gal/min | 60.2l/min‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed, Low Range | 1.9mph | 3.1km/h‖ — metric converted from the published imperial value |
| Travel Speed, High Range | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
| Fuel Capacity | 12.4gal | 46.9l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 16.2gal | 61.3l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 11.8gal/min | 44.7l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.9rpm |
|---|
07 Blade Specification
| Maximum Drop Below Ground | 1.1ft in | 335mm‖ — metric converted from the published imperial value |
|---|---|---|
| Blade Lift Height | 14.2in | 361mm‖ — metric converted from the published imperial value |
08 Boom Specification
| Boom Swing Left | 75degrees | |
|---|---|---|
| Boom Swing Right | 55degrees |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.