Kubota U25
The Kubota U25 is a mini excavator with an operating weight of 5,625 lb, and a 20.7 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota U25 sits below the median for its class:
- Operating weight 5,630 lb lighter than 63% (n=438)
- Engine power 21 hp less powerful than 64% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
| Width To Outside Of Tracks | 4.92ft in | 1,500mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.94ft in | 287mm‖ — metric converted from the published imperial value |
02 Undercarriage Specification
| Drawbar Pull | 6745lb | 3,059kg‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 3.32psi | 22.9kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
03 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | D1105 | |
| Net Power | 20.7hp | 15.4kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 68.5cu in | 1,123cm3‖ — metric converted from the published imperial value |
| Aspiration | liquid-cooled, overhead valve diesel engine |
04 Operational Specification
| Operating Weight | 5625lb | 2,551kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1gal | 4l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 5.8gal | 22l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.2gal | 4.5l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 20.3gal/min | 76.8l/min‖ — metric converted from the published imperial value |
05 Swing Mechanism Specification
| Swing Speed | 9.8rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.