Kubota U15
The Kubota U15 is a mini excavator with an operating weight of 3,704 lb, a 12.9 hp engine, and a dig depth of 7.58 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota U15 sits below the median for its class:
- Operating weight 3,700 lb lighter than 81% (n=438)
- Engine power 13 hp less powerful than 95% (n=448)
- Dig depth 7.6 ft shallower-digging than 77% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 11.72ft in | 3,572mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 11.62ft in | 3,542mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.55ft in | 2,301mm‖ — metric converted from the published imperial value |
| Max Loading Height | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 12.6ft in | 3,840mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 6.27ft in | 1,911mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.58ft in | 2,310mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.07ft in | 1,241mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.48ft in | 146mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 2.6mph | 4.2km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 3.7psi | 26kpa‖ — metric converted from the published imperial value |
| Drawbar Pull | 4405lb | 1,998kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105 | |
| Gross Power | 12.9hp | 9.62kw‖ — metric converted from the published imperial value |
| Net Power | 12.9hp | 9.62kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 47.5cu in | 778cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 3704lb | 1,680kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 4.7gal | 18l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 0.7gal | 3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 3.5gal | 13l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1gal | 4l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 4.4gal/min | 17l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.7rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.