Specification sheet Compact Track Loader Ref kubota-svl90-2-multi-terrain-loader

Kubota SVL90-2

The Kubota SVL90-2 is a compact track loader with an operating weight of 11,298.7 lb (5,125 kg), a 92 hp engine, a rated operating capacity of 3,009.31 lb (1,365 kg), and a tipping load of 8,598.1 lb (3,900 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,298.7lb
5,125kg
Engine power
92hp
68.7kW
Gross Power
Rated operating capacity
3,009.31lb
1,365kg
Tipping load
8,598.1lb
3,900kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Kubota SVL90-2 sits at the heavy end of its class:

  • Operating weight 11,300 lb heavier than 90% (n=182)
  • Engine power 92 hp more powerful than 85% (n=167)
  • Rated operating capacity 3,010 lb higher-rated than 66% (n=156)

Scale drawingdrawn to scale · mm

2118C299D3764A2972B1667E
Side elevation
2118C450F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Model V3800-CR-T
Gross Power 92hp 68.7kw
Power Measured @ 2400rpm
Displacement 230cu in 3.8L
Bore 4in 100mm
Stroke 4.8in 120mm
Aspiration Turbochar

02 Operational Specification

Bucket Width 6.7ft in 2032mm
Operating Weight 11298.7lb 5125kg
Fuel Capacity 29.9gal 113.2L
Hydraulic System Fluid Capacity 18gal 68.2L
Traction Force 12178lb 54.2kN
Max Speed - Low Range 5mph 8.1km/h
Max Speed - High Range 7.3mph 11.8km/h

03 Loader Specification

Lifting Capacity At Maximum Height 5868.8lb 2662kg
Breakout Force 6742lb 3058.2kg
Tipping Load 8598.1lb 3900kg
Operating Load 3009.4lb 1365kg
Bucket Breakout Force 7961lb 35.5kN

04 Hydraulic Specification

Auxiliary Hydraulic Flow 25.1gal/min 95.1L/min
Pump Flow 25.1gal/min 95.1L/min
Relief Valve Pressure 3555psi 24510.9kPa

05 Dimensions Dimensions

Width Over Tracks 1.48ft in 450mm
Height To Top Of Cab 6.95ft in 2118mm
Ground Clearance 11.78in 299mm
Reach At Max Lift And Dump 3.4ft in 1035mm
Length With Out Bucket 9.76ft in 2972mm
Dump Angle 43degrees
Length With Bucket 12.35ft in 3764mm
Bucket Hinge Pin 128.59in 3266mm
Overall Width 77.25in 1962mm
Turning Radius From Center - Machine Rear 113.47in 2882mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.47ft in 1667mm
Track Gauge 4.97ft in 1512mm
Number Of Track Rollers Per Side 5
Ground Pressure 4.3psi 29.65kPa

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.