Specification sheet Compact Track Loader Ref kubota-svl75-2hfwc-multi-terrain-loader
Kubota SVL75-2HFWC
The Kubota SVL75-2HFWC is a compact track loader with an operating weight of 9,358.63 lb (4,245 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,358.63lb
4,245kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Kubota SVL75-2HFWC sits in the middle of its class:
- Operating weight 9,360 lb lighter than 51% (n=182)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V3800CR-TIE F4 | |
| Model Name | SVL75-2HFWC | |
| Aspiration | Turbocharged |
02 Capacities Specification
| Hydraulic Oil Tank | 9.2gal | 34.9L |
|---|
03 Operational Specification
| Operating Weight | 9358.7lb | 4245kg |
|---|---|---|
| Fuel Capacity | 24.6gal | 93.2L |
| Hydraulic System Fluid Capacity | 15.9gal | 60.2L |
04 Transmission Specification
| Max Travel Speed | 7.1mph | 11.5km/h |
|---|---|---|
| Min Travel Speed | 4.7mph | 7.6km/h |
05 Loader Specification
| Lift Arm Path | Vertical | |
|---|---|---|
| Bucket Breakout Force | 6204lb | 27.6kN |
| Lift Arm Breakout Force | 4766.4lb | 2162kg |
06 Hydraulic Specification
| Pressure | 17.4psi | 120kPa |
|---|
07 Undercarriage Dimensions
| Length Of Track On Ground | 4.72ft in | 1436mm |
|---|---|---|
| Ground Pressure | 5.6psi | 38.62kPa |
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 12.6in | 320mm |
?Questions & answersfrom this machine's data
- How much does a Kubota SVL75-2HFWC compact track loader weigh?
- A Kubota SVL75-2HFWC compact track loader has an operating weight of 9,358.6 lb (4,245 kg).
- How much fuel does a Kubota SVL75-2HFWC compact track loader hold?
- A Kubota SVL75-2HFWC compact track loader has a fuel capacity of 24.6 gal (93.2 L).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.