Specification sheet Skid Steer Loader Ref kubota-ssv75-skid-steer-loader
Kubota SSV75
The Kubota SSV75 is a skid steer loader with an operating weight of 8,421.66 lb (3,820 kg), and a 74.3 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,421.66lb
3,820kg
Engine power
74.3hp
55.5kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Kubota SSV75 sits at the heavy end of its class:
- Operating weight 8,420 lb heavier than 88% (n=334)
- Engine power 74 hp more powerful than 75% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V3307-CR-TE4 | |
| Gross Power | 74.3hp | 55.5kw |
| Power Measured @ | 2600rpm | |
| Aspiration | Turbocharged | |
| Displacement | 12406.2cu in | 203.3L |
| Model Name | SSV75 |
02 Operational Specification
| Auxiliary Hydraulic Flow | 20.9gal/min | 79L/min |
|---|---|---|
| Travel Speed, Low Range | 7.1mph | 11.4km/h |
| Travel Speed, High Range | 11.4mph | 18.3km/h |
| Auxiliary Fuel Tank | 60.8gal | 230L |
| Operational Weight | 8421.7lb | 3820kg |
| Hydraulic System Fluid Capacity | 4.3gal | 16L |
03 Loader Specification
| Bucket Breakout Force | 2669lb | 11.9kN |
|---|---|---|
| Lift Capacity At Full Height | 5452.1lb | 2473kg |
04 Dimensions Dimensions
| Ground Clearance | 8.55in | 217mm |
|---|
?Questions & answersfrom this machine's data
- How much does a Kubota SSV75 skid steer weigh?
- A Kubota SSV75 skid steer has an operating weight of 8,421.7 lb (3,820 kg).
- What engine does a Kubota SSV75 skid steer have?
- A Kubota SSV75 skid steer is powered by a Kubota V3307-CR-TE4 engine producing 74.3 hp (55.5 kW).
- What is the ground clearance of a Kubota SSV75 skid steer?
- A Kubota SSV75 skid steer has a ground clearance of 8.6 in (217 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.