Specification sheet Skid Steer Loader Ref kubota-ssv65-skid-steer-loader
Kubota SSV65
The Kubota SSV65 is a skid steer loader with an operating weight of 7,054.8 lb (3,200 kg), and a 64 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,054.8lb
3,200kg
Engine power
64hp
47.8kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Kubota SSV65 sits in the middle of its class:
- Operating weight 7,050 lb heavier than 60% (n=334)
- Engine power 64 hp more powerful than 51% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V2607-CR-TE4 | |
| Gross Power | 64hp | 47.8kw |
| Power Measured @ | 2700rpm | |
| Aspiration | Turbocharged | |
| Displacement | 9745.5cu in | 159.7L |
| Model Name | SSV65 |
02 Operational Specification
| Auxiliary Hydraulic Flow | 18gal/min | 68L/min |
|---|---|---|
| Travel Speed, Low Range | 6.9mph | 11.1km/h |
| Travel Speed, High Range | 11mph | 17.7km/h |
| Auxiliary Fuel Tank | 60.8gal | 230L |
| Operational Weight | 7054.8lb | 3200kg |
| Fuel Capacity | 25.4gal | 96L |
| Hydraulic System Fluid Capacity | 4.3gal | 16L |
03 Loader Specification
| Bucket Breakout Force | 4839lb | 21.6kN |
|---|---|---|
| Lift Capacity At Full Height | 4409.3lb | 2000kg |
04 Dimensions Dimensions
| Ground Clearance | 7.92in | 201mm |
|---|
?Questions & answersfrom this machine's data
- How much does a Kubota SSV65 skid steer weigh?
- A Kubota SSV65 skid steer has an operating weight of 7,054.8 lb (3,200 kg).
- What engine does a Kubota SSV65 skid steer have?
- A Kubota SSV65 skid steer is powered by a Kubota V2607-CR-TE4 engine producing 64 hp (47.8 kW).
- What is the ground clearance of a Kubota SSV65 skid steer?
- A Kubota SSV65 skid steer has a ground clearance of 7.9 in (201 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.