Specification sheet Wheel Loader Ref kubota-r630c-wheel-loader
Kubota R630C
The Kubota R630C is a wheel loader with an operating weight of 10,725.49 lb (4,865 kg), a 47.9 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,725.49lb
4,865kg
Engine power
47.9hp
35.8kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kubota R630C sits below the median for its class:
- Operating weight 10,730 lb lighter than 67% (n=374)
- Engine power 48 hp less powerful than 84% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Electrical System Specification
| Starter | 12 / 2 (V / kW) | |
|---|---|---|
| Battery | 12 / 95 (V / Ah) |
02 Engine Specification
| Emissions Certification | Tier4 Final | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | KUBOTA | |
| Engine Model | V2607-CR-TE4 | |
| Net Power | 47.9hp | 35.8kw |
| Gross Power | 51hp | 38.1kw |
| Power Measured @ | 2400rpm | |
| Displacement | 160cu in | 2.7L |
| Aspiration | Water-cooled |
03 Capacities Specification
| Hydraulic Oil Tank | 10.4gal | 39L |
|---|---|---|
| Fuel Tank | 18.5gal | 70L |
| Hydraulic System | 15.1gal | 57L |
04 Operational Specification
| Operating Weight | 10725.5lb | 4865kg |
|---|---|---|
| Traction Force | 8587.8lb | 38.2kN |
| Static Tipping Weight | 8212.3lb | 3725kg |
| Rear Axle Oscillation | 8degrees | |
| Tire Size | 405 / 70 R18 |
05 Transmission Specification
| Transmission Type | Hydrostatic transmission | |
|---|---|---|
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
06 Hydraulic System Specification
| Max Operating Pressure | 3000 psi | |
|---|---|---|
| Pump Flow Capacity | 17.8gal/min | 67.2L/min |
| Raise Time | 5.9sec | |
| Lower Time | 4.2sec |
07 Bucket Dimensions
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
|---|---|---|
| Breakout Force | 10408.66lb | 46.3kN |
08 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 350mm |
|---|---|---|
| Length With Bucket On Ground | 17.02ft in | 5185mm |
| Width Over Tires | 5.93ft in | 1805mm |
| Height To Top Of Cab | 8.21ft in | 2500mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.67ft in | 3250mm |
| Reach At Max Lift And Dump | 2.71ft in | 825mm |
| Tread | 55.12in | 1400mm |
| Articulation Angle | 40 degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.