Specification sheet Wheel Loader Ref kubota-r530c-wheel-loader

Kubota R530C

The Kubota R530C is a wheel loader with an operating weight of 9,799.55 lb (4,445 kg), a 47.9 hp engine, and a 1.12 yd³ (0.85 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,799.55lb
4,445kg
Engine power
47.9hp
35.8kW
Net Power
Bucket capacity
1.12yd³
0.85m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Kubota R530C sits below the median for its class:

  • Operating weight 9,800 lb lighter than 77% (n=374)
  • Engine power 48 hp less powerful than 84% (n=367)
  • Bucket capacity 1.1 yd³ smaller-bucket than 66% (n=309)

Scale drawingdrawn to scale · mm

2475B325C5295A
Side elevation
2475B1721D
Front elevation

01 Electrical System Specification

Starter 12 / 2 (V / kW)
Battery 12 / 95 (V / Ah)

02 Engine Specification

Emissions Certification Tier4 Final
Number Of Cylinders 4
Engine Make KUBOTA
Engine Model V2607-CR-E4
Net Power 47.9hp 35.8kw
Gross Power 51hp 38.1kw
Power Measured @ 2400rpm
Displacement 160cu in 2.7L
Aspiration Water-cooled

03 Capacities Specification

Hydraulic Oil Tank 10.4gal 39L
Fuel Tank 18.5gal 70L
Hydraulic System 14.6gal 55L

04 Operational Specification

Operating Weight 9799.6lb 4445kg
Traction Force 6542lb 29.1kN
Static Tipping Weight 6536.8lb 2965kg
Rear Axle Oscillation 8degrees
Tire Size 365 / 70 R18

05 Transmission Specification

Transmission Type Hydrostatic transmission
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

06 Hydraulic System Specification

Max Operating Pressure 2700 psi
Pump Flow Capacity 14.3gal/min 53.8L/min
Raise Time 6.3sec
Lower Time 4sec

07 Bucket Dimensions

Bucket Capacity - Heaped 1.12yd3 0.85m3
Breakout Force 7755.91lb 34.5kN

08 Dimensions Dimensions

Ground Clearance 1.07ft in 325mm
Length With Bucket On Ground 17.38ft in 5295mm
Width Over Tires 5.65ft in 1721mm
Height To Top Of Cab 8.13ft in 2475mm
Wheelbase 6.4ft in 1950mm
Hinge Pin - Max Height 10.59ft in 3225mm
Reach At Max Lift And Dump 2.73ft in 830mm
Tread 53.39in 1356mm
Articulation Angle 40 degrees

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.