Kubota KX91-3
The Kubota KX91-3 is a mini excavator with an operating weight of 7,110 lb, a 28 hp engine, and a dig depth of 10.42 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota KX91-3 sits in the middle of its class:
- Operating weight 7,110 lb heavier than 57% (n=438)
- Engine power 28 hp more powerful than 64% (n=448)
- Dig depth 10.4 ft deeper-digging than 70% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.62ft in | 4,761mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 16.25ft in | 4,953mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.59ft in | 3,533mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 16.84ft in | 5,133mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.84ft in | 2,390mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.42ft in | 3,176mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.97ft in | 296mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 4.5psi | 31kpa‖ — metric converted from the published imperial value |
| Drawbar Pull | 8363lb | 3,793kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1503 | |
| Net Power | 28hp | 21kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 91.5cu in | 1,499cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 7110lb | 3,225kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 11.9gal | 45l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 9.5gal | 36l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 27.3gal/min | 103l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9.4rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.