Kubota KX71-3GLS
The Kubota KX71-3GLS is a mini excavator with an operating weight of 6,547.8 lb, a 26.4 hp engine, and a dig depth of 9.55 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota KX71-3GLS sits in the middle of its class:
- Operating weight 6,550 lb heavier than 50% (n=438)
- Engine power 26 hp more powerful than 58% (n=448)
- Dig depth 9.6 ft deeper-digging than 56% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 6.86ft in | 2,091mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 9.55ft in | 2,911mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 11.42ft in | 3,481mm‖ — metric converted from the published imperial value |
| Mximum Dig Radius | 189.38in | 4,810.3mm‖ — metric converted from the published imperial value |
| Max Digging Height | 15.42ft in | 4,700mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Length Of Track On Ground | 5.25ft in | 1,600mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.94ft in | 287mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.98ft in | 2,432mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 5.25ft in | 1,600mm‖ — metric converted from the published imperial value |
| Width | 4.93ft in | 1,503mm‖ — metric converted from the published imperial value |
| Height | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
| Shoe Width | 0.99ft in | 302mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Ground Pressure | 3.41psi | 23.5kpa‖ — metric converted from the published imperial value |
|---|---|---|
| Counterweight, Standard | 132.28lb | 60.001kg‖ — metric converted from the published imperial value |
| Drawbar Pull | 15837788.68lb | 7,183,894.243kg‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.8mph | 4.5km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Oil Filtration | Spin on type | |
| Air Filter Type | Dual element | |
| Number Of Cylinders | 4 | |
| Cooling Method | Liquid | |
| Engine Make | Kubota | |
| Engine Model | V1505-E4 | |
| Engine Type | Water cooled | |
| Gross Power | 24.4hp | 18.2kw‖ — metric converted from the published imperial value |
| Net Power | 26.4hp | 19.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 91.4cu in | 1,498cm3‖ — metric converted from the published imperial value |
| Fuel Type | Diesel | |
| Injection | Indirect | |
| Model Name | KX71-3GLS |
05 Operational Specification
| Operating Weight | 6547.8lb | 2,970kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 11.9gal | 45l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 13.4gal | 50.7l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 8.6gal/min | 33l/min‖ — metric converted from the published imperial value |
06 Electrical Specification
| Battery Voltage | 12VDC | |
|---|---|---|
| Battery Capacity | 55AH | |
| Instrument Panel | Digital | |
| Engine Shut-Off | Key | |
| Block Heater | Optional |
07 Swing Mechanism Specification
| Swing Speed | 9.4rpm |
|---|
08 Blade Specification
| Maximum Drop Below Ground | 1.2ft in | 366mm‖ — metric converted from the published imperial value |
|---|---|---|
| Blade Lift Height | 11.9in | 302mm‖ — metric converted from the published imperial value |
| Width | 5ft in | 1,524mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.