Kubota KX033-4HGAX
The Kubota KX033-4HGAX is a mini excavator with an operating weight of 7,616 lb, a 23.2 hp engine, and a dig depth of 10.54 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota KX033-4HGAX sits above the median for its class:
- Operating weight 7,620 lb heavier than 63% (n=438)
- Engine power 23 hp less powerful than 56% (n=448)
- Dig depth 10.5 ft deeper-digging than 72% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 7.34ft in | 2,237mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 10.54ft in | 3,213mm‖ — metric converted from the published imperial value |
| Boom Offset-Left | 1.48ft in | 451mm‖ — metric converted from the published imperial value |
| Boom Offset-Right | 1.35ft in | 411mm‖ — metric converted from the published imperial value |
| Max Digging Height | 16.34ft in | 4,980mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 11.59ft in | 3,533mm‖ — metric converted from the published imperial value |
| Mximum Dig Radius | 205.91in | 5,230.1mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Length Of Track On Ground | 15.52ft in | 4,730mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.96ft in | 293mm‖ — metric converted from the published imperial value |
| Height | 97.64in | 2,480mm‖ — metric converted from the published imperial value |
| Shoe Width | 0.99ft in | 302mm‖ — metric converted from the published imperial value |
| Width | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 4.37psi | 30.1kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | Kubota | |
|---|---|---|
| Engine Model | D1703M-DI-E4 | |
| Engine Type | Water cooled | |
| Gross Power | 24.8hp | 18.5kw‖ — metric converted from the published imperial value |
| Net Power | 23.2hp | 17.3kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 100.5cu in | 1,647cm3‖ — metric converted from the published imperial value |
| Fuel Type | Diesel | |
| Model Name | KX033-4HGAX |
05 Operational Specification
| Operating Weight | 7616lb | 3,455kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 12.4gal | 46.9l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 11.8gal | 44.7l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 16.2gal/min | 61.3l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.9rpm |
|---|
07 Blade Specification
| Maximum Drop Below Ground | 1.3ft in | 396mm‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Lift Above Ground | 1.2ft in | 366mm‖ — metric converted from the published imperial value |
| Height | 13.6in | 345mm‖ — metric converted from the published imperial value |
| Width | 5.1ft in | 1,554mm‖ — metric converted from the published imperial value |
| Blade Lift-Upper | 1.2ft in | 366mm‖ — metric converted from the published imperial value |
| Blade Lift-Left | 1.3ft in | 396mm‖ — metric converted from the published imperial value |
08 Drive System Specification
| Max. Traction Force-Low Speed | 6091lb | 2,763kg‖ — metric converted from the published imperial value |
|---|---|---|
| Tumbler Distance | 5.5ft in | 1,676mm‖ — metric converted from the published imperial value |
| Crawler Length | 6.9ft in | 2,103mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.