Kubota KX018-4H
The Kubota KX018-4H is a mini excavator with an operating weight of 3,747 lb, a 15.2 hp engine, and a dig depth of 7.81 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota KX018-4H sits below the median for its class:
- Operating weight 3,750 lb lighter than 81% (n=438)
- Engine power 15 hp less powerful than 85% (n=448)
- Dig depth 7.8 ft shallower-digging than 71% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 12.67ft in | 3,862mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Vertical Wall Digging Depth | 6.45ft in | 1,966mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.81ft in | 2,380mm‖ — metric converted from the published imperial value |
| Max Digging Height | 11.36ft in | 3,463mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 7.81ft in | 2,380mm‖ — metric converted from the published imperial value |
| Mximum Dig Radius | 154.34in | 3,920.2mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Length Of Track On Ground | 12.18ft in | 3,712mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.53ft in | 162mm‖ — metric converted from the published imperial value |
| Width | 3.25ft in | 991mm‖ — metric converted from the published imperial value |
| Height | 92.52in | 2,350mm‖ — metric converted from the published imperial value |
| Shoe Width | 0.76ft in | 232mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Ground Pressure | 3.41psi | 23.5kpa‖ — metric converted from the published imperial value |
|---|---|---|
| Drawbar Pull | 7261.33lb | 3,293.68kg‖ — metric converted from the published imperial value |
| Counterweight, Standard | 132.28lb | 60.001kg‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.5mph | 4km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Air Filter Type | Dual element | |
|---|---|---|
| Number Of Cylinders | 3 | |
| Engine Model | D902-E4-BH-3 | |
| Engine Type | Water cooled | |
| Gross Power | 17.7hp | 13.2kw‖ — metric converted from the published imperial value |
| Net Power | 15.2hp | 11.3kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2050rpm | |
| Displacement | 54.8cu in | 898cm3‖ — metric converted from the published imperial value |
| Fuel Type | Diesel | |
| Oil Filter | Spin on type | |
| Injection | Indirect |
05 Operational Specification
| Operating Weight Cabin | 3967lb | 1,799kg‖ — metric converted from the published imperial value |
|---|---|---|
| Operating Weight | 3747lb | 1,700kg‖ — metric converted from the published imperial value |
| Fuel Capacity | 5.6gal | 21l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 3.8gal/min | 14l/min‖ — metric converted from the published imperial value |
06 Electrical Specification
| Lighting | Front working | |
|---|---|---|
| Battery Voltage | 12VDC | |
| Battery Capacity | 52AH | |
| Block Heater | Optional |
07 Swing Mechanism Specification
| Swing Speed | 9.1rpm |
|---|
08 Blade Specification
| Maximum Drop Below Ground | 0.8ft in | 244mm‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Lift Above Ground | 0.8ft in | 244mm‖ — metric converted from the published imperial value |
| Height | 9.1in | 231mm‖ — metric converted from the published imperial value |
| Width | 4.3ft in | 1,311mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.