Kubota K008-3
The Kubota K008-3 is a mini excavator with an operating weight of 2,200 lb, a 7.5 hp engine, and a dig depth of 5.63 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kubota K008-3 sits at the compact end of its class:
- Operating weight 2,200 lb lighter than 97% (n=438)
- Engine power 8 hp less powerful than 99% (n=448)
- Dig depth 5.6 ft shallower-digging than 97% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
02 Dimensions Specification
| Width To Outside Of Tracks | 2.3ft in | 701mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.5ft in | 152mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 2.89ft in | 881mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.5ft in | 762mm‖ — metric converted from the published imperial value |
| Shoe Width | 0.6ft in | 183mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 7.09in | 180mm‖ — metric converted from the published imperial value |
|---|---|---|
| Drawbar Pull | 1390lb | 630.5kg‖ — metric converted from the published imperial value |
| Ground Pressure | 3.41psi | 23.5kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.5mph | 4km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | KUBOTA D722-EBH | |
| Engine Type | Water cooled | |
| Gross Power | 7.7hp | 5.7kw‖ — metric converted from the published imperial value |
| Net Power | 7.5hp | 5.6kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2050rpm | |
| Displacement | 44cu in | 721cm3‖ — metric converted from the published imperial value |
| Fuel Type | Diesel |
05 Operational Specification
| Operating Weight | 2200lb | 997.9kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 3.2gal | 12l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 3.3gal | 12l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 5.6gal/min | 21l/min‖ — metric converted from the published imperial value |
06 Electrical Specification
| Lighting | Front working | |
|---|---|---|
| Battery Voltage | 12 VDC 30 AH | |
| Battery Capacity | 150CCA | |
| Engine Shut-Off | Key | |
| Block Heater | None |
07 Swing Mechanism Specification
| Swing Speed | 8.3rpm |
|---|
08 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 |
|---|
?Questions & answersfrom this machine's data
- How much does a Kubota K008-3 mini excavator weigh?
- A Kubota K008-3 mini excavator has an operating weight of 2,200 lb (997.9 kg). The metric figure is converted from the published imperial value.
- What engine does a Kubota K008-3 mini excavator have?
- A Kubota K008-3 mini excavator is powered by a KUBOTA D722-EBH engine producing 7.5 hp (5.6 kW). The metric figure is converted from the published imperial value.
- How deep can a Kubota K008-3 mini excavator dig?
- A Kubota K008-3 mini excavator has a maximum dig depth of 5.6 ft (1,716 mm). The metric figure is converted from the published imperial value.
- What is the tail swing radius of a Kubota K008-3 mini excavator?
- A Kubota K008-3 mini excavator has a tail swing radius of 2.5 ft (762 mm). The metric figure is converted from the published imperial value.
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.