Specification sheet Wheel Loader Ref komatsu-wr11-3-wheel-loader
Komatsu WR11-3
The Komatsu WR11-3 is a wheel loader with an operating weight of 19,036.92 lb (8,635 kg), a 83.82 hp engine, and a 1.71 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,036.92lb
8,635kg
Engine power
83.82hp
62.5kW
Gross Power Bucket capacity
1.71yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WR11-3 sits above the median for its class:
- Operating weight 19,040 lb heavier than 85% (n=374)
- Engine power 84 hp more powerful than 66% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 69% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S4D102E | |
| Gross Power | 83.9hp | 62.5kw |
| Power Measured @ | 2400rpm | |
| Displacement | 239.3cu in | 4L |
02 Operational Specification
| Operating Weight | 19037lb | 8635kg |
|---|---|---|
| Fuel Capacity | 35.2gal | 133L |
| Turning Radius | 19.2ft in | 5830mm |
| Tire Size | 16.9-24-10PR |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 18.7mph | 30km/h |
| Max Speed - Reverse | 19mph | 30.5km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 10.32ft in | 3145mm |
|---|---|---|
| Bucket Width | 7.85ft in | 2390mm |
| Bucket Capacity - Heaped | 1.71yd3 | 1.3m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 21.28ft in | 6485mm |
| Width Over Tires | 7.39ft in | 2250mm |
| Height To Top Of Cab | 9.96ft in | 3035mm |
| Wheelbase | 9.57ft in | 2915mm |
| Hinge Pin - Max Height | 13.13ft in | 4000mm |
| Reach At Max Lift And Dump | 4.86ft in | 1480mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.