Specification sheet Wheel Loader Ref komatsu-wa95-3-wheel-loader
Komatsu WA95-3
The Komatsu WA95-3 is a wheel loader with an operating weight of 12,191.57 lb (5,530 kg), a 75 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,191.57lb
5,530kg
Engine power
75hp
55.93kW
Gross Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA95-3 sits in the middle of its class:
- Operating weight 12,190 lb lighter than 52% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D 106 E 2 | |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 191.8lb ft | 260Nm |
| Displacement | 269.3cu in | 4.5L |
| Torque Measured @ | 1500rpm |
02 Operational Specification
| Operating Weight | 12191.6lb | 5530kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Hydraulic System Fluid Capacity | 24.9gal | 94L |
| Engine Oil Fluid Capacity | 4.4gal | 16.4L |
| Cooling System Fluid Capacity | 4.5gal | 17L |
| Front Axle/Diff Fluid Capacity | 1.8gal | 6.5L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 10714.5lb | 4860kg |
| Turning Radius | 13.3ft in | 4040mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 455/70 R 20 SPT9 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2755.8psi | 19000kPa |
|---|---|---|
| Pump Flow Capacity | 23.8gal/min | 90L/min |
| Raise Time | 5.7sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.7sec | |
| Pump Type | closed hydraulic circuit |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.99ft in | 2740mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Bucket Width | 7.06ft in | 2150mm |
| Breakout Force | 16298.65lb | 72.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.66ft in | 505mm |
|---|---|---|
| Length With Bucket On Ground | 18.25ft in | 5560mm |
| Height To Top Of Cab | 9.03ft in | 2750mm |
| Wheelbase | 7.06ft in | 2150mm |
| Hinge Pin - Max Height | 11.31ft in | 3445mm |
| Reach At Max Lift And Dump | 2.5ft in | 760mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.