Specification sheet Wheel Loader Ref komatsu-wa85-3-wheel-loader
Komatsu WA85-3
The Komatsu WA85-3 is a wheel loader with an operating weight of 11,023.12 lb (5,000 kg), a 65 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,023.12lb
5,000kg
Engine power
65hp
48.48kW
Gross Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA85-3 sits below the median for its class:
- Operating weight 11,020 lb lighter than 65% (n=374)
- Engine power 65 hp less powerful than 58% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D98E | |
| Gross Power | 65hp | 48.5kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 177.1lb ft | 240Nm |
| Displacement | 202.5cu in | 3.4L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 11023.2lb | 5000kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Hydraulic System Fluid Capacity | 25.1gal | 95L |
| Engine Oil Fluid Capacity | 2.5gal | 9.4L |
| Cooling System Fluid Capacity | 3.3gal | 12.3L |
| Front Axle/Diff Fluid Capacity | 1.7gal | 6.1L |
| Rear Axle/Diff Fluid Capacity | 1.8gal | 6.5L |
| Static Tipping Weight | 8884.7lb | 4030kg |
| Turning Radius | 12.5ft in | 3790mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 405/70 R20 SPT 9 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 3.6mph | 5.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2973.3psi | 20500kPa |
|---|---|---|
| Pump Flow Capacity | 17gal/min | 64.1L/min |
| Raise Time | 4.9sec | |
| Dump Time | 1sec | |
| Lower Time | 2.6sec | |
| Pump Type | closed hydraulic circuit |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.49ft in | 2585mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Bucket Width | 6.73ft in | 2050mm |
| Breakout Force | 10925.72lb | 48.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 17.75ft in | 5410mm |
| Height To Top Of Cab | 8.76ft in | 2670mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.59ft in | 3225mm |
| Reach At Max Lift And Dump | 2.84ft in | 865mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.