Specification sheet Wheel Loader Ref komatsu-wa70-6-wheel-loader

Komatsu WA70-6

The Komatsu WA70-6 is a wheel loader with an operating weight of 11,155.39 lb (5,060 kg), a 60.3 hp engine, and a 1.12 yd³ (0.85 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,155.39lb
5,060kg
Engine power
60.3hp
44.97kW
Gross Power
Bucket capacity
1.12yd³
0.85m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA70-6 sits below the median for its class:

  • Operating weight 11,160 lb lighter than 61% (n=374)
  • Engine power 60 hp less powerful than 63% (n=367)
  • Bucket capacity 1.1 yd³ smaller-bucket than 66% (n=309)

Scale drawingdrawn to scale · mm

2465B305C5445A
Side elevation
2465B1625D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Komatsu
Engine Model 4D95LWE-5
Gross Power 60.3hp 45kw
Torque 154.9lb ft 210Nm
Power Measured @ 2.4rpm 2.35rpm
Torque Measured @ 1.6rpm
Bore 3.8in 95mm
Stroke 4.6in 115mm

02 Operational Specification

Operating Weight 11155.4lb 5060kg
Fuel Capacity 34.9gal 132L
Hydraulic System Fluid Capacity 13.3gal 50L
Engine Oil Fluid Capacity 2gal 7.5L
Cooling System Fluid Capacity 2.5gal 9.1L
Front Axle/Diff Fluid Capacity 2.3gal 8.4L
Rear Axle/Diff Fluid Capacity 2.3gal 8.4L
Alternator Supplied Amperage 90amps

03 Transmission Specification

Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 3.2mph 5km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Pump Flow Capacity 14.1gal/min 53L/min
Raise Time 5.3sec
Dump Time 1.1sec
Lower Time 3sec

05 Bucket Dimensions

Bucket Capacity - Heaped 1.12yd3 0.85m3

06 Dimensions Dimensions

Ground Clearance 1.01ft in 305mm
Length With Bucket On Ground 17.87ft in 5445mm
Width Over Tires 5.34ft in 1625mm
Height To Top Of Cab 8.09ft in 2465mm
Wheelbase 6.73ft in 2050mm
Hinge Pin - Max Height 10.34ft in 3150mm
Reach At Max Lift And Dump 3.07ft in 935mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.